| Источник света | Visible red, class 2 laser, 650 nm |
|---|---|
| Supply Voltage | 12 to 30 V dc |
| Power and Current Consumption, exclusive of load | Normal Run Mode:1.7 W, Current consumption |
| Зона чувствительности |
LE250: 100 mm to 400 mm LE550: 100 mm to 1000 mm |
| Конфигурация Выхода |
Analog output: 4 to 20 mA or 0 to 10 V, depending on model
Discrete output:Discrete NPN/PNP is userconfigurable |
| Выходная мощность s |
Discrete output ratings: 100 mA maximum (protected against continuous overload and short circuit) OFF-state leakage current—PNP: OFF-state leakage current—NPN: Output saturation voltage—PNP outputs: Output saturation voltage—NPN outputs: Analog current output (LE...I Models):1 kΩ max. @ 24 V; max. load resistance = [Vcc-4.5/0.02 Ω] Analog voltage output (LE...U Models):2.5 kΩ min. load resistance |
| Удалённый вход |
Allowable Input Voltage Range: 0 to Vcc Active Low (internal weak pullup—sinking current): High State > 4.3 V at 740 μA max. Low State Active High (internal weak pulldown—sourcing current): High State > 4.3 V at 1.7 mA max. Low State |
| Цепи защиты | Protected against reverse polarity and transient overvoltages |
| Analog Resolution |
LE250: 100 mm to 250 mm: 250 mm to 400 mm: LE550: 100 mm to 600 mm: 600 mm to 1000 mm: |
| Analog Linearity |
LE250:Linearity is the lesser of Accuracy or 0.3% of full scale range (± 0.9 mm) at any given distance. LE550:Linearity is the lesser of Accuracy or 0.5% of full scale range (± 4.5 mm) at any given distance. |
| Analog Accuracy |
LE250: 100 mm to 250 mm: +/- 0.375 mm 250 mm to 400 mm: +/- 1 mm LE550: 100mm to 600 mm: +/- 2 mm 600 mm to 1000 mm: +/- 10 mm |
| Measurement/Output Rate | |
| Response Time |
Fast: 2 ms Standard: 5 ms Medium: 15 ms Slow: 50 ms |
| Delay at Power Up | |
| Устойчивость к освещенности окружающей среды | > 10,000 lux |
| Minimum Window Size, Analog and Discrete |
LE250: 1 mm LE550:10 mm |
| Bore Spec | 1 cm radius at 1 m |
| Максимальный крутящий момент | 2 N·m (17.7 in-lbs) |
| индикатор |
Power LED Indicator: Solid Green = Normal operation, power On and laser On Flashing Green (1 Hz) = Power On and laser Off (laser enable mode) Analog Output LED Indicator: Solid Amber = Target is within the taught window Off = Target is outside the taught window Discrete Output LED Indicator: Solid Amber = Discrete Output is On Off = Discrete Output is Off |
| конструкция |
Housing: die-cast zinc Lens cover:acrylic |
| Vibration/Mechanical Shock | All models meet Mil. Std. 202 G requirements method 201A. Also meets IEC 60947-5-2. |
| Степень защиты | IP67, NEMA 6 |
| Условия эксплуатации |
Temperature: −20 °C to +55 °C (−4 °F to +131°F) Humidity: 90% at +55 °C (non-condensing) |
| Температура хранения | −30 °C to +65 °C (−22 °F to +149 °F) |
| Application Note | For optimum performance, allow 10 minutes for the sensor to warm up. |
The LE series' linear array technology provides great performance and resolution regardless of detection object's color or sheen.
- Ready to measure right out of the box
- Easy adjustment with a two-line, eight-character intuitive display
- Linear array provides repeatability and accuracy for challenging targets