| Напряжение питания и ток |
Q60BB6AF models:10 to 30V dc (10% max. ripple) @ less than 50 mA (exlusive of load) Q60BB6LAF models:10 to 30V dc (10% max. ripple) @ less than 35 mA (exclsive of load) Q60VR3 models:12 to 250V dc or 24 to 250V ac, 50/60 Hz; Input power 1.5 W max. |
|---|---|
| Range | Minimum range varies by established cutoff point.
Adjustable-field (visible red):65-130 mm, depending on adjustable cutoff of 200-1000 mm Adjustable-field (infrared):50-120 mm, depending on adjustable cutoff of 200-2000 mm Adjustable-field (Class 1 laser):100-260 mm, depending on adjustable cutoff of 200-1400 mm Adjustable-field (Class 2 laser):75-240 mm, depending on adjustable cutoff of 200-2000 mm |
| Цепи защиты | Protected against reverse polarity and transient voltages. Q45VR3 models dc hookup is without regard to polarity. |
| Конфигурация Выхода |
Q60BB6 models: Bipolar:One NPN (current sinking) and one PNP (current sourcing)
Q60VR3 cabled models:SPDT (Single-Pole Double-Throw) electromechanical relay output, normally closed and normally open contactsQ60VR3 QD models:SPST (Single-Pole Single-Throw) electromechanical relay output, normally open contact |
| Выходная мощность |
Q60BB6 models:150 mA max. each output @ 25° C OFF-state leakage current:less than 5 µA 30V dc Output Saturation : NPN:less than 200 mV @ 10 mA; less than 1V @ 150 mA
PNP:less than 1V @ 10 mA; less than 1.5V @ 150 mA
Q60VR3 models:Min. voltage and current:5V dc, 10 mA Mechanical life of relay:50,000 operations Electrical life of relay at full resistive load:100,000 operations Max. switching power (resistive load): Cabled models:1250 VA, 150 W
QD models:750 VA, 90 W
Max. switching voltage (resistive load):Cabled models:250V ac, 125V dc
QD models:250V ac, 125V dc
Max. switching current (resistive load):Cabled models:5 A @ 250V ac, 5 A @ 30V dc derated to 200 mA @ 125V dc
QD models:3 A @ 250V ac, 3 A @ 30V dc derated to 200 mA @ 125V dc
|
| Выходная цепь защиты |
Q60BB6 models:Protected against continuous overload or short circuit of outputs Q60VR3 models:Proteted against false pulse on power-up |
| Выходной время отклика |
Q60BB6 models:2 milliseconds ON/OFF Q60VR3 models:15 milliseconds ON/OFF |
| Задержка при включении питания |
Q60BB6LAF models:1 second max.; outputs do not conduct during this time. All others:150 milliseconds; outputs do not conduct during this time. |
| Повторяемость результатов | 500 microseconds |
| Sensing Hysteresis |
200 mm cutoff:less than 3% of set cutoff distance 1600 mm cutoff:less than 2.25% of set cutoff distance 1200 mm cutoff:less than 1.30% of set cutoff distance 800 mm cutoff:less than 0.5% of set cutoff distance 400 mm cutoff:less than 0.25% of set cutoff distance |
| регулировка | Single, geared, 2-turn, cutoff range adjustment screw (mechanical stops on both ends of travel)
2 momentary push buttons:ON Delay (+) and OFF Delay (-) ON Delay select:8 milliseconds to 16 seconds
OFF Delay select:8 millseconds to 16 seconds
LO/DO select:light operate or dark operate
push-button lockout:ON for security
|
| индикатор |
ON Delay: Green ON steady:Run mode, ON Delay is active
Green flashing:ON Delay selection mode is active
OFF Delay:Green ON steady:Run mode, OFF Delay is active
Green flashing:OFF Delay Selection mode is active
5-Segment Light Bar*:Indicates relative delay time during ON or OFF Delay Selection modesOutput: Amber ON steady:Outputs ON/OFF Delay selection modes
Green ON steady:During ON/OFF Delay selection modes
Dark Operate:Green ON steady:Dark operate is selected
Lockout:Green ON steady:Buttons are locked out
Light Operate:Green ON steady:Light operate is selected
Signal:Green ON steady:Sensor is receiving signal
Green flashing:Marginal signal (1.0 to 2.25 excess gain)
*Note:Output, dark operate, lockout, light operate and signal indicators function as 5-Segment light bar during ON or OFF Delay selection modes |
| Laser Characteristics |
Spot Size:approx. 4 x 2 mm throughout range (collimated beam) Angle of divergence:5 milliradians Note:Contact factory for custom laser spot size. |
| конструкция |
Housing:ABS polycarbonate blend Lens:Acrylic Cover:Clear ABS |
| Степень защиты | IEC IP67; NEMA 6 |
| соединение |
Q60BB6 models:2 m or 9 m attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately. Q60VR3 models:2 m or 9 m attached cable, or 4-pin Micro-style quick-disconnect fitting. QD cables are ordered separately. |
| Условия эксплуатации |
Temperature: Q60BB6LAF models:-10° to +50° C
Q60VR6LAF models:-10° to +45° C
All others:-20° to +55° C
Relative humidity:90% @ 50° C (non-condensing) |
- Detects objects within a defined sensing field, ignoring objects located just beyond the sensing field cutoff
- Features two-turn, logarithmic adjustment of sensing field cutoff point from 0.2 to 2 m
- Offers infrared, visible red LED or laser sensing beam
- Uses rotating pointer to indicate relative cutoff point setting within sensing range
- Available with standard 10 to 30V dc and bipolar NPN/PNP outputs or 12 to 250V ac and 24 to 250V ac with e/m relay output
- Features easy push-button or remote programming of light/dark operate and output timing
- Uses continuous status indicators to verify all settings at a glance