At a glance
Compact 60 mm absolute encoder with a resolution of up to 14 bits |
Servo flange |
Radial connector outlet |
Analog interface 4...20 mA or 0…10 V |
Programming via keypad on the encoder |
IP 68 protection class |
Working temperature: -30°C to +80°C |
Your benefits
Intuitive parameter setting of the measurement path directly on the device via keypad saves time and requires no special expert knowledge. |
Easy modification of the measurement range using the teach-in function on the device enables fast setup of a variety of measuring ranges. |
The compact size (including M12 connection technology) allows the encoder to be used in confined spaces and thus provides greater freedom for development and machine design. |
The analog interfaces (current/voltage) offer a low-cost solution for detecting the position and path, and thereby help to reduce overall system costs. |
Performance | |||
Max. number of steps per revolution: | 10,486 | ||
Разрешающая способность: | 10,486 | ||
Resolution per measuring step: | 1.525 µA | ||
Measuring range: | 640 ° ... 23,040 °, programmable | ||
Linearity: | ± 0.3 % |
Mechanical data | |||
Диаметр вала: | 6 mm | ||
Масса: | 0.4 kg | ||
Крутящий момент на старте: | 0.05 Ncm (+20 °C) | ||
Момент вращения: | 0.3 Ncm (+20 °C) | ||
Permissible Load capacity of shaft: | 30 N (axial), 60 N (radial) | ||
Maximum operating speed: | 10,000 U/min | ||
Moment of inertia of the rotor: | 30 gcm² | ||
Bearing lifetime: | 2Â x 10^9 revolutions | ||
Макс. угловое ускорение: | 500,000 rad/s² | ||
Shaft material: | Stainless steel | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Die-cast aluminum | ||
Shaft length: | 10 mm | ||
Housing: | 60 mm |
Electrical data | |||
Диапазон рабочего напряжения: | 18 V DC ... 33 V DC | ||
Тип подключения: | Connector M12, 5-pin, radial | ||
Кодовая последовательность: | CW 1) | ||
Защита от обратной полярности: | 1 | ||
Потребляемая мощность: | |||
Load resistance max.: | 600 Ω | ||
Electrical wiring: | 3-wire or 4-wire, see figure |
Interfaces | |||
Electrical interface: | Analog, 4 mA ... 20 mA |
Данные окуражающей среды | |||
EMC: | (EN 61000-6-2) (EN 61000-6-4) |
||
Enclosure rating: | IP 68 | ||
Permissible relative humidity: | 90 % | ||
Working temperature range: | -30 °C ... +80 °C | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 50 g, 6 ms (EN 60068-2-27) | ||
Resistance to vibration: | 4 g, 5 Hz ... 100 Hz (EN 60068-2-6) |
At a glance
Compact 60 mm absolute encoder with a resolution of up to 14 bits |
Servo flange |
Radial connector outlet |
Analog interface 4...20 mA or 0…10 V |
Programming via keypad on the encoder |
IP 68 protection class |
Working temperature: -30°C to +80°C |
Your benefits
Intuitive parameter setting of the measurement path directly on the device via keypad saves time and requires no special expert knowledge. |
Easy modification of the measurement range using the teach-in function on the device enables fast setup of a variety of measuring ranges. |
The compact size (including M12 connection technology) allows the encoder to be used in confined spaces and thus provides greater freedom for development and machine design. |
The analog interfaces (current/voltage) offer a low-cost solution for detecting the position and path, and thereby help to reduce overall system costs. |
Performance | |||
Max. number of steps per revolution: | 13,107 | ||
Разрешающая способность: | 13,107 | ||
Resolution per measuring step: | 0.76 mV | ||
Measuring range: | 640 ° ... 23,040 °, programmable | ||
Linearity: | ± 0.3 % |
Mechanical data | |||
Диаметр вала: | 6 mm | ||
Масса: | 0.4 kg | ||
Крутящий момент на старте: | 0.05 Ncm (+20 °C) | ||
Момент вращения: | 0.3 Ncm (+20 °C) | ||
Permissible Load capacity of shaft: | 30 N (axial), 60 N (radial) | ||
Maximum operating speed: | 10,000 U/min | ||
Moment of inertia of the rotor: | 30 gcm² | ||
Bearing lifetime: | 2Â x 10^9 revolutions | ||
Макс. угловое ускорение: | 500,000 rad/s² | ||
Shaft material: | Stainless steel | ||
Материал фланца: | Aluminum | ||
Материал корпуса: | Die-cast aluminum | ||
Shaft length: | 10 mm | ||
Housing: | 60 mm |
Electrical data | |||
Диапазон рабочего напряжения: | 18 V DC ... 33 V DC | ||
Load resistance min.: | 10 kΩ | ||
Тип подключения: | Connector M12, 5-pin, radial | ||
Кодовая последовательность: | CW 1) | ||
Защита от обратной полярности: | 1 | ||
Потребляемая мощность: | |||
Electrical wiring: | 4-wire, see figure |
Interfaces | |||
Electrical interface: | Analog, 0 V ... 10 V |
Данные окуражающей среды | |||
EMC: | (EN 61000-6-2) (EN 61000-6-4) |
||
Enclosure rating: | IP 68 | ||
Permissible relative humidity: | 90 % | ||
Working temperature range: | -30 °C ... +80 °C | ||
Storage temperature range: | -40 °C ... +100 °C, without package | ||
Устойчивость к ударам: | 50 g, 6 ms (EN 60068-2-27) | ||
Resistance to vibration: | 4 g, 5 Hz ... 100 Hz (EN 60068-2-6) |