Facebook Mail.ru ok.ru ВКонтакте
 
+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 
 
 
 
 
ATM90 PROFIBUS
Главная» Продукция» SICK» Энкодеры» Абсолютные энкодеры» ATM90 PROFIBUS
 
 
ATM90-PTF11X13
Арт. 1032896

At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 100 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTF12X12
    Арт. 1032660

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTF13X11
    Арт. 1032654

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTF13X13
    Арт. 1030042

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTG11X13
    Арт. 1032899

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTG12X12
    Арт. 1032663

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTG13X11
    Арт. 1032657

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PTG13X13
    Арт. 1030045

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 12 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUF11X13
    Арт. 1032897

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUF12X12
    Арт. 1032661

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUF13X11
    Арт. 1032655

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUF13X13
    Арт. 1030043

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUG11X13
    Арт. 1032900

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUG12X12
    Арт. 1032664

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUG13X11
    Арт. 1032658

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PUG13X13
    Арт. 1030046

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 1/2 "
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXF11X13
    Арт. 1032898

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXF12X12
    Арт. 1032662

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXF13X11
    Арт. 1032656

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXF13X13
    Арт. 1030044

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.6 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 x M14 screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXG11X13
    Арт. 1032901

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 8,192
    Разрешающая способность: 2,048 x 8,192
    Resolution: 11 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXG12X12
    Арт. 1032665

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 4,096
    Разрешающая способность: 4,096 x 4,096
    Resolution: 12 bit x 12 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXG13X11
    Арт. 1032659

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 2,048
    Разрешающая способность: 8,192 x 2,048
    Resolution: 13 bit x 11 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
    ATM90-PXG13X13
    Арт. 1030047

    At a glance

  		•  Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  		• Mechanical interface: through hollow shaft with shallow installation depth
  		• Zero-set and preset functions via hardware or software
  		• No battery required
  		• Electrical interface: PROFIBUS DP as per IEC61158 / RS -485 , electrically isolated
  		• Electronically adjustable, configurable resolution
  		• Magnetic scanning

    Your benefits

  		•  Fewer variants are required since one freely programmable encoder offers all singleturn and multiturn resolutions
  		• Easy setup due to various electrical connection adapters (cable, M23)
  		• Application flexibility due to easily interchangeable collets for the blind hollow shaft
  		• Quick commissioning using the zero set/preset function either at the press of the button on the device or via software
  		• Increased productivity due to highly reliable shock and vibration resistance
  		• Worldwide availability and service ensure quick and reliable customer service
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 8,192
    Разрешающая способность: 8,192 x 8,192
    Resolution: 13 bit x 13 bit
    Пределы погрешности: ± 0.25 °
    Repeatability (Ta not constant): 0.1 °
    Шаг измерения: 0.043 °
    Время инициализации: 1,250 ms 1)
    Mechanical data
    Механический интерфейс: Through hollow shaft
    Диаметр вала: 16 mm
    Масса: 0.8 kg
    Крутящий момент на старте: 0.5 Ncm
    Момент вращения: 0.4 Ncm
    Moment of inertia of the rotor: 153 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 600,000 rad/s²
    Shaft material: Stainless steel
    Материал фланца: Aluminum
    Материал корпуса: Die-cast aluminum
    Electrical data
    Диапазон рабочего напряжения: 10 V ... 32 V
    Power consumption max.: 2 W
    MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Bus adaptor with 3 cable screw fixings
    SET (electronic adjustment): Via PRESET push button or protocol
    Bus: PROFIBUS DP
    Bus interface: RS-485 1)2)3)
    Data protocol: Profile for encoders (07hex) - Class 2
    Address setting: 0 ... 127, DIP-switches or protocol
    Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection
    Status information: LED green (operation), LED red ( bus activity)
    Bus termination: DIP switch
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3)
    Enclosure rating: IP 65 (according to IEC 60529), with shaft seal
    Permissible relative humidity: 98 %
    Working temperature range: -20 °C ... 80 °C
    Storage temperature range: -40 °C ... 125 °C, without package
    Устойчивость к ударам: 6 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz
     
     

     
     
    ⋆
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: