
At a glance
| PROFINET gateway to connect sensors with peripherals |
| Slot for optional cloning module CMC600 |
| Simple voltage supply of scanner |
| IP 65 connection of a scanner using SICK standard cable |
| Direct access to the service interface of the sensor |
| Connection diagram integrated in lid |
| Clearly visible and easily accessible screw/spring-loaded terminals |
Your benefits
| Easy connection of the sensor to PROFINET |
| Fast exchange of the sensor through parameter memory CMC |
| Fast installation and easy networking save time |
| Simple troubleshooting |
The product has been discontinued. Please follow the "replacement product" link for information about alternative products.
| Features | |||
| Краткое описание: | Modular connection module for two sensors, additional M12 socket for PROFINET on face plate. Reduction of cable glands from 6 to 4, M12 socket for CAN bus and M12 plug for connection to power supply on front side, 1.2 A fuse | ||
| Поддерживаемые продукты: | RFU63x | ||
| Supports cloning module (CMC): | No | ||
| Supports display module (CMD): | No | ||
| Supports power supply module (CMP): | No | ||
| Supports fieldbus gateway (CMF): | No | ||
| Interfaces | |||
| Serial (RS-232, RS-422/485): | ![]() |
||
| Remark (Serial (RS-232, RS-422/485)): | Depending on sensor connected | ||
| Ethernet: | - | ||
| CAN bus: | ![]() |
||
| Remark (CAN bus): | Depending on sensor connected | ||
| PROFIBUS DP: | - | ||
| DeviceNet: | - | ||
| Switching inputs: | Depending on sensor connected | ||
| Switching outputs: | Depending on sensor connected | ||
| Оптический индикатор: | 4 LED (Status and error display) | ||
| Конфигурация программного обеспечения: | SOPAS ET | ||
| Механика/электроника | |||
| Потребляемая мощность: | Power consumption of the gateway + 3.5 W and of the sensor + 1 W | ||
| Housing: | Polycarbonat | ||
| Enclosure rating: | IP 65 (DIN 40 050) 1) | ||
| Класс защиты: | III (VDE 0106) | ||
| Вес: | 1,160 g | ||
| Dimensions: | 192 mm x 167 mm x 70 mm | ||
| Цвет корпуса: | Blue (RAL 5012) | ||
| Подключения сканера: | 15-pin D-Sub HD socket | ||
| Сервисный разъем: | 9-pin D-Sub plug (internal) | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -35 °C ... +40 °C | ||
| Storage temperature: | -35 °C ... +70 °C | ||
| Permissible relative humidity: | ± 90 %, non-condensing | ||
| General notes | |||
| Life cycle phase: | Phased out | ||













