At a glance
| 13.56 MHz RFID write/read device for ranges up to 240 mm |
| Transponder communication according to ISO/IEC 15693 standard |
| Compact, industrial design with integrated antenna |
| Embedded protocols allow interfacing with standard industrial fieldbus technologies |
| Powerful micro-processor executes internally configurable logic |
| Flexible trigger control |
| Supports parameter cloning via microSD memory card |
| Built-in diagnostics |
Your benefits
| Reliable identification ensures maximum throughput |
| Adapts to changing needs, ensures investment over the long term |
| Simple integration saves installation time |
| A wide range of functionality ensures flexible solutions |
| Maintenance-free |
| Uses same connectivity and configuration software as SICK's bar code scanners and image-based code readers - compatible through standardized 4Dpro platform |
| Features | |||
| Product category: | Write/read device with integrated antenna | ||
| Frequency band: | HF (13.56 MHz) | ||
| Carrier frequency: | 13.56 MHz | ||
| Версия: | Mid Range | ||
| Output power: | 1,000 mW | ||
| RFID standard: | ISO/IEC 15693, ISO 18000-3 Mode 1 | ||
| Scanning range: | Max. 240 mm 1) | ||
| Антенна: | Integrated | ||
| Дополнительные функции: | Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering | ||
| Скорость передачи данных: | 26 kbit/s (default) | ||
| Typical access times: | Read 1 block (32 bit/4 Byte): 13 ms Write 1 block (32 bit/4 Byte): 16 ms Read 28 blocks (896 bit/112 Byte): 64 ms Write 28 blocks (896 bit/112 Byte): 442 ms Read UID (64 bit/8 Byte): 18 ms |
||
| Разрешение на преминение: | Global (EN 300330-2 V1.5.1) (FCC Part 15) | ||
| Тип подключения: | Cable | ||
| Interfaces | |||
| Serial (RS-232, RS-422): |  |
||
| Data transmission rate (Serial (RS-232, RS-422)): | 0.3 kBaud ... 500 kBaud | ||
| Ethernet: | - | ||
| Protocol (Ethernet): | PROFINET (optional via external connection module CDF600-2), EtherCAT (optional via external connection module CDF600) | ||
| CAN bus: | |
||
| Data transmission rate (CAN bus): | 20 kbit/s ... 1,000 kbit/s | ||
| Protocol (CAN bus): | CANopen, CSN (SICK CAN Sensor Network) | ||
| PROFIBUS DP: | |
||
| Remark (PROFIBUS DP): | Optional via external connection module (CDF600-2) | ||
| DeviceNet: | |
||
| Remark (DeviceNet): | Optional available externally | ||
| Switching inputs: | 4 (“Sensor 1â€, “Sensor 2â€, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420) | ||
| Switching outputs: | 4 (“Result 1â€, “Result 2â€, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420) | ||
| Оптический индикатор: | 7 LEDs (feedback LED, status displaysReady, Result, RF, Data, CAN, LNK TX) | ||
| Акустический индикатор: | 1 beeper (to confirm reading, adjustable) | ||
| Конфигурация программного обеспечения: | SOPAS ET | ||
| Механика/электроника | |||
| Electrical connection: | 1 x Cable with 15-pin D-sub HD male connector | ||
| Operating voltage: | 10 V DC ... 30 V DC | ||
| Потребляемая мощность: | Typ. 8 W | ||
| Цвет корпуса: | Blue, black | ||
| Enclosure rating: | IP 67 | ||
| Класс защиты: | III | ||
| Вес: | 760 g, with connecting cable | ||
| Dimensions: | 147 mm x 88 mm x 39 mm | ||
| Данные окуражающей среды | |||
| Electromagnetic compatibility (EMC): | EN 301489-3 V1.4.1 Receiver Class 2 | ||
| Виброустойчивость: | EN 60068-2-6 | ||
| Ударопрочность: | EN 60068-2-27 | ||
| Ambient operating temperature: | -20 °C ... +50 °C | ||
| Storage temperature: | -25 °C ... +70 °C | ||
| Permissible relative humidity: | 95 %, non-condensing | ||
At a glance
| 13.56 MHz RFID write/read device for ranges up to 240 mm |
| Transponder communication according to ISO/IEC 15693 standard |
| Compact, industrial design with integrated antenna |
| Embedded protocols allow interfacing with standard industrial fieldbus technologies |
| Powerful micro-processor executes internally configurable logic |
| Flexible trigger control |
| Supports parameter cloning via microSD memory card |
| Built-in diagnostics |
Your benefits
| Reliable identification ensures maximum throughput |
| Adapts to changing needs, ensures investment over the long term |
| Simple integration saves installation time |
| A wide range of functionality ensures flexible solutions |
| Maintenance-free |
| Uses same connectivity and configuration software as SICK's bar code scanners and image-based code readers - compatible through standardized 4Dpro platform |
| Features | |||
| Product category: | Write/read device with integrated antenna | ||
| Frequency band: | HF (13.56 MHz) | ||
| Carrier frequency: | 13.56 MHz | ||
| Версия: | Mid Range | ||
| Output power: | 1,000 mW | ||
| RFID standard: | ISO/IEC 15693, ISO 18000-3 Mode 1 | ||
| Scanning range: | Max. 240 mm 1) | ||
| Антенна: | Integrated, additional connection for external antenna | ||
| Дополнительные функции: | Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering | ||
| Скорость передачи данных: | 26 kbit/s (default) | ||
| Typical access times: | Read 1 block (32 bit/4 Byte): 13 ms Write 1 block (32 bit/4 Byte): 16 ms Read 28 blocks (896 bit/112 Byte): 64 ms Write 28 blocks (896 bit/112 Byte): 442 ms Read UID (64 bit/8 Byte): 18 ms |
||
| Разрешение на преминение: | Global (EN 300330-2 V1.5.1) (FCC Part 15) | ||
| Тип подключения: | Ethernet | ||
| Interfaces | |||
| Serial (RS-232, RS-422): | |
||
| Data transmission rate (Serial (RS-232, RS-422)): | 0.3 kBaud ... 500 kBaud | ||
| Ethernet: | |
||
| Protocol (Ethernet): | TCP/IP, EtherNet/IP, PROFINET, EtherCAT (optional via external connection module CDF600) | ||
| Data transmission rate (Ethernet): | 10/100 Mbit | ||
| CAN bus: | |
||
| Data transmission rate (CAN bus): | 20 kbit/s ... 1,000 kbit/s | ||
| Protocol (CAN bus): | CANopen, CSN (SICK CAN Sensor Network) | ||
| PROFIBUS DP: | |
||
| Remark (PROFIBUS DP): | Optional via external connection module (CDF600-2) | ||
| DeviceNet: | |
||
| Remark (DeviceNet): | Optional available externally | ||
| Switching inputs: | 4 (“Sensor 1â€, “Sensor 2â€, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420) | ||
| Switching outputs: | 4 (“Result 1â€, “Result 2â€, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420) | ||
| Оптический индикатор: | 7 LEDs (feedback LED, status displaysReady, Result, RF, Data, CAN, LNK TX) | ||
| Акустический индикатор: | 1 beeper (to confirm reading, adjustable) | ||
| Конфигурация программного обеспечения: | SOPAS ET | ||
| Механика/электроника | |||
| Electrical connection: | 1 x Swivel connector with 4-pin M12 female connector and 17-pin M12 male connector | ||
| Operating voltage: | 10 V DC ... 30 V DC | ||
| Потребляемая мощность: | Typ. 8 W | ||
| Цвет корпуса: | Blue, black | ||
| Enclosure rating: | IP 67 | ||
| Класс защиты: | III | ||
| Вес: | 710 g | ||
| Dimensions: | 147 mm x 88 mm x 39 mm 1) | ||
| Данные окуражающей среды | |||
| Electromagnetic compatibility (EMC): | EN 301489-3 V1.4.1 Receiver Class 2 | ||
| Виброустойчивость: | EN 60068-2-6 | ||
| Ударопрочность: | EN 60068-2-27 | ||
| Ambient operating temperature: | -20 °C ... +50 °C | ||
| Storage temperature: | -25 °C ... +70 °C | ||
| Permissible relative humidity: | 95 %, non-condensing | ||