Facebook Mail.ru ok.ru ВКонтакте
 
+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 
 
 
 
 
RFU63x / Long Range
Главная» Продукция» SICK» Решения для идентификации» Радиочастотная идентификация RFID» RFU63x / Long Range
 
 
RFU630-04100
Арт. 1058117

At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device without integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 865 MHz ... 868 MHz
    Версия: Long Range
    Output power: 30 dBm at external antenna ports, output power adjustable
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: 4 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Europe (EN 302 208-2 V1.4.1)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-04101
    Арт. 1059999

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device without integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 902 MHz ... 928 MHz
    Версия: Long Range
    Output power: 30 dBm at external antenna ports, output power adjustable
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: 4 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: USA (FCC Part 15)
    Canada
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-04106
    Арт. 1068569

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device without integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 916.8 MHz ... 920.4 MHz
    Версия: Long Range
    Output power: 30 dBm at external antenna ports, output power adjustable
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: 4 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Japan (ARIB STD-T106)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-04108
    Арт. 1070904

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device without integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 866.2 MHz ... 867.6 MHz
    Версия: Long Range
    Output power: 30 dBm at external antenna ports, output power adjustable
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: 4 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Russia (EN 302 208-2 V1.4.1)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13100
    Арт. 1054396

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 865 MHz ... 868 MHz
    Версия: Long Range
    Output power: 2 W (ERP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Europe (EN 302 208-2 V1.4.1)
    South Africa
    Saudi Arabia
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13101
    Арт. 1054397

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 902 MHz ... 928 MHz
    Версия: Long Range
    Output power: 4 W (EIRP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: USA (FCC Part 15)
    Canada
    México
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13102
    Арт. 1058775

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 920.25 MHz ... 925.75 MHz
    Версия: Long Range
    Output power: 4 W (EIRP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Australia (AS/NZ4268)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13103
    Арт. 1067473

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 865.6 MHz ... 867 MHz
    Версия: Long Range
    Output power: 2 W (ERP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: India (EN 302 208-2 V1.4.1)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13104
    Арт. 1068726

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 902 MHz ... 907.5 MHz, 915 MHz ... 928 MHz
    Версия: Long Range
    Output power: 4 W (EIRP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Brazilian (ANATEL Res. No. 506)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13105
    Арт. 1057943

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 920.625 MHz ... 924.375 MHz
    Версия: Long Range
    Output power: 2 W (ERP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: China (SRRC)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13106
    Арт. 1067133

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 916.8 MHz ... 920.4 MHz
    Версия: Long Range
    Output power: 4 W (EIRP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 5 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Japan (ARIB STD-T106)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13107
    Арт. 1061498

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 916.8 MHz ... 920.4 MHz
    Версия: Long Range
    Output power: 0.5 W (EIRP, for integrated antenna, alternatively 24 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 2 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Japan (ARIB STD-T107)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
    RFU630-13108
    Арт. 1070903

    At a glance

  		•  UHF RFID read/write unit for industrial applications
  		• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
  		• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)
  		• Supports common industrial data interfaces and fieldbuses
  		• MicroSD memory card for device parameter cloning
  		• Several diagnostic and service options available

    Your benefits

  		•  Intelligent technology allows stand-alone usage
  		• Highest reading/writing performance
  		• Flexible integration in common industrial fieldbuses via 4Dpro compatibility
  		• Less maintenance time due to an integrated cloning back-up system using microSD memory card
  		• Easily adapts to application requirements via SOPAS parameter setting tool
  		• Free usable feedback LED quickly provides read results and diagnostic information directly to the user
    Features
    Product category: Write/read device with integrated antenna
    Frequency band: UHF (860 ... 960 MHz)
    Carrier frequency: 866.2 MHz ... 867.6 MHz
    Версия: Long Range
    Output power: 2 W (ERP, for integrated antenna, alternatively 30 dBm at external antenna ports, output power adjustable)
    RFID standard: EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6 C
    Scanning range: Typ. 2 m 1)
    Антенна: Integrated (circular polarized, axial ration typ. 2 dB, 72° field opening, front to back ratio > 17 dB), additionally 3 external antenna ports
    Сервисные функции: Parameter cloning with integrated microSD memory card slot or externally via CMC module in CDB620
    Дополнительные функции: Cloning function (microSD memory card or system), Diagnosis, Updatable firmware, Freely programmable data output format, Heartbeat, Triggering
    Разрешение на преминение: Russia (EN 302 208-2 V1.4.1)
    MTBF: 14 a
    Modulation: DSB-ASK, PR-ASK
    Interfaces
    Serial (RS-232, RS-422/485):
    Function (Serial (RS-232, RS-422/485)): Host, AUX
    Data transmission rate (Serial (RS-232, RS-422/485)): 300 Baud ... 115.2 kBaud, AUX: 57.6 kBaud (RS-232)
    USB:
    Function (USB): AUX
    Remark (USB): USB 2.0
    Ethernet:
    Function (Ethernet): Host, AUX
    Protocol (Ethernet): TCP/IP, EtherNet/IP, PROFINET
    Data transmission rate (Ethernet): 10/100 Mbit
    CAN bus:
    Function (CAN bus): Host
    Protocol (CAN bus): CSN (SICK CAN Sensor Network)
    PROFIBUS DP:
    Remark (PROFIBUS DP): Optional via external connection module (CDF)
    DeviceNet:
    Remark (DeviceNet): Optional available externally
    Switching inputs: 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional parameter storage CMC600 in CDB620/CDM420)
    Switching outputs: 4 (“Result 1”, “Result 2”, 2 outputs via optional parameter storage CMC600 in CDB620/CDM420)
    Оптический индикатор: 8 LEDs, one of them multi-colored (function configurable via SOPAS, alternatively controlling with sw commands, status displays)
    Акустический индикатор: 1 beeper/buzzer (can be switched off, can be allocated as a result indication function)
    Элементы управления: 2 buttons (choose and start/stop functions)
    Конфигурация программного обеспечения: SOPAS ET
    EtherCAT: 0
    Механика/электроника
    Electrical connection: 1 x M12, 17-pin male connector, 1 x M12, 4-pin female connector Ethernet, Cylindrical connections
    Operating voltage: 18 V DC ... 30 V DC
    Потребляемая мощность:
    Housing: Die-cast aluminum
    Цвет корпуса: Blue, black, silver
    Enclosure rating: IP 67
    Класс защиты: III
    Вес: 3.5 kg
    Dimensions: 239 mm x 239 mm x 64 mm
    Данные окуражающей среды
    Electromagnetic compatibility (EMC): EN 61000-6-4 (2007-09) / EN 61000-6-2 (2009-05)
    Виброустойчивость: EN 60068-2-6 (2008-02)
    Ударопрочность: EN 60068-2-27 (2009-05)
    Ambient operating temperature: -25 °C ... +50 °C
    Storage temperature: -30 °C ... +70 °C
    Permissible relative humidity: ± 90 %, non-condensing
     
     

     
     
    ⋆
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: