At a glance
| Operating distance up to 4 mm |
| NAMUR |
| ATEX device category 1G and 2G |
| Output according to DIN EN 60947-5-6 |
| Types M12 |
Your benefits
| Exceptional protection in explosive areas |
| Category 1G and 2G for zones 0 and 1 provides protection in explosive areas |
| Output according to DIN EN 60947-5-6 |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 1,200 Hz | ||
| Output type: | NAMUR | ||
| Output function: | NC | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 2-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 7.5 V DC ... 25 V DC 1) | ||
| Потребляемая мощность: | ≤ 30 mA 2) | ||
| Current consumption, sensor is activated: | ≤ 1 mA | ||
| Current consumption, sensor is not activated: | ≥ 2.2 mA | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-6 | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| Cable diameter: | 4.9 mm | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +70 °C | ||
| Материал корпуса крышки: | Plastic, PBT | ||
| Длина корпуса: | 30 mm | ||
| Thread length: | 29 mm | ||
| Момент затяжки, Макс.: | 7 Nm | ||
| Items supplied: | Fastening nuts (2 x); width across 17, metal | ||
| EC Approval Certificate: | PTB 03 ATEX 2037 | ||
| Ex area category: | 1G, 2G | ||
| Input voltage Ui max.: | 15 V 3) | ||
| Input power Pi max.: | 120 mW 4) | ||
| Input current Ii max.: | 50 mA 5) | ||
| Internal capacitance Ci max.: | 140 nF 6) | ||
| Internal inductance Li max.: | 340 µH 7) | ||
| Nominal voltage: | 8.2 V DC | ||
| Device labeling: | II 1 G Ex ia IIB T6 Ta: -20 °C ... +70 °C, II 2 G Ex ia IIC T6 Ta: -20 °C ... +70 °C | ||
| Cable resistance: | 50 Ω | ||
| Материал корпуса: | Metal, Nickel-plated brass | ||
| Вес: | 130 g | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.5 | ||
| Installation note | |||
| B: | 12 mm | ||
| C: | 12 mm | ||
| D: | 6 mm | ||
| F: | 16 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance up to 4 mm |
| NAMUR |
| ATEX device category 1G and 2G |
| Output according to DIN EN 60947-5-6 |
| Types M12 |
Your benefits
| Exceptional protection in explosive areas |
| Category 1G and 2G for zones 0 and 1 provides protection in explosive areas |
| Output according to DIN EN 60947-5-6 |
| Features | |||
| Housing: | Cylindrical | ||
| Thread size: | M12 x 1 | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 1,500 Hz | ||
| Output type: | NAMUR | ||
| Output function: | NC | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 2-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 7.5 V DC ... 25 V DC 1) | ||
| Потребляемая мощность: | ≤ 30 mA 2) | ||
| Current consumption, sensor is activated: | ≤ 1 mA | ||
| Current consumption, sensor is not activated: | ≥ 2.2 mA | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-6 | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.34 mm² | ||
| Cable diameter: | 4.9 mm | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -20 °C ... +70 °C | ||
| Материал корпуса крышки: | Plastic, PBT | ||
| Длина корпуса: | 30 mm | ||
| Thread length: | 25 mm | ||
| Момент затяжки, Макс.: | 7 Nm | ||
| Items supplied: | Fastening nuts (2 x); width across 17, metal | ||
| EC Approval Certificate: | PTB 03 ATEX 2037 | ||
| Ex area category: | 1G, 2G | ||
| Input voltage Ui max.: | 15 V 3) | ||
| Input power Pi max.: | 120 mW 4) | ||
| Input current Ii max.: | 50 mA 5) | ||
| Internal capacitance Ci max.: | 140 nF 6) | ||
| Internal inductance Li max.: | 130 µH 7) | ||
| Nominal voltage: | 8.2 V DC | ||
| Device labeling: | II 1 G Ex ia IIB T6 Ta: -20 °C ... +70 °C, II 2 G Ex ia IIC T6 Ta: -20 °C ... +70 °C | ||
| Cable resistance: | 50 Ω | ||
| Материал корпуса: | Metal, Nickel-plated brass | ||
| Вес: | 127 g | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.5 | ||
| Installation note | |||
| A: | 12 mm | ||
| B: | 24 mm | ||
| C: | 12 mm | ||
| D: | 12 mm | ||
| E: | 8 mm | ||
| F: | 32 mm | ||
| Remark: | Associated graphic see "Installation" | ||