At a glance
| Flat, compact design |
| Long sensing distance up to 1.5 mm |
| Easily visible indication LEDs |
| Available in a plastic housing |
| Dimensions: 8 mm x 16 mm x 4 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 16 mm x 4 mm | ||
| Sensing range Sn: | 1.5 mm | ||
| Assured sensing range Sa: | 1.215 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 600 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 2) | ||
| Потребляемая мощность: | 10 mA 3) | ||
| Time delay before availability: | ≤ 10 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 100 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.09 mm² | ||
| Cable diameter: | 2.5 mm | ||
| защита от короткого замыкания: |  |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA 6 | ||
| Момент затяжки, Макс.: | 0.06 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| D: | 4.5 mm | ||
| E: | 0 mm | ||
| F: | 24 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Flat, compact design |
| Long sensing distance up to 1.5 mm |
| Easily visible indication LEDs |
| Available in a plastic housing |
| Dimensions: 8 mm x 16 mm x 4 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 16 mm x 4 mm | ||
| Sensing range Sn: | 1.5 mm | ||
| Assured sensing range Sa: | 1.215 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 600 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 2) | ||
| Потребляемая мощность: | 10 mA 3) | ||
| Time delay before availability: | ≤ 10 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 100 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.09 mm² | ||
| Cable diameter: | 2.5 mm | ||
| защита от короткого замыкания: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA 6 | ||
| Момент затяжки, Макс.: | 0.06 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| D: | 4.5 mm | ||
| E: | 0 mm | ||
| F: | 24 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Flat, compact design |
| Long sensing distance up to 1.5 mm |
| Easily visible indication LEDs |
| Available in a plastic housing |
| Dimensions: 8 mm x 16 mm x 4 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 16 mm x 4 mm | ||
| Sensing range Sn: | 1.5 mm | ||
| Assured sensing range Sa: | 1.215 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 600 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 2) | ||
| Потребляемая мощность: | 10 mA 3) | ||
| Time delay before availability: | ≤ 10 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 100 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.09 mm² | ||
| Cable diameter: | 2.5 mm | ||
| защита от короткого замыкания: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA 6 | ||
| Момент затяжки, Макс.: | 0.06 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| D: | 4.5 mm | ||
| E: | 0 mm | ||
| F: | 24 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Flat, compact design |
| Long sensing distance up to 1.5 mm |
| Easily visible indication LEDs |
| Available in a plastic housing |
| Dimensions: 8 mm x 16 mm x 4 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 16 mm x 4 mm | ||
| Sensing range Sn: | 1.5 mm | ||
| Assured sensing range Sa: | 1.215 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 600 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | 2) | ||
| Потребляемая мощность: | 10 mA 3) | ||
| Time delay before availability: | ≤ 10 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 100 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.09 mm² | ||
| Cable diameter: | 2.5 mm | ||
| защита от короткого замыкания: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA 6 | ||
| Момент затяжки, Макс.: | ≤ 0.06 Nm | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| D: | 4.5 mm | ||
| E: | 0 mm | ||
| F: | 24 mm | ||
| Remark: | Associated graphic see "Installation" | ||