At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | 3.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 10 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | 3.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | AMP Super Seal connector, 0.85 m 2) | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable with AMP connector, 850 mm | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PUR | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 10 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | 3.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 5 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | 3.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 8 mm | ||
| C: | 8 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable with connector M8, with knurled nuts, 0.2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable with connector M8, with knurled nuts, 0.3 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Special features: | Different oscillator frequency | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.2 | ||
| Aluminum (Al): | 0.3 | ||
| Brass (Br): | 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | ± 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Special features: | Different oscillator frequency | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 2 mm | ||
| Assured sensing range Sa: | 1.62 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 5 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | ± 0.7 | ||
| Copper (Cu): | ± 0.2 | ||
| Aluminum (Al): | ± 0.3 | ||
| Brass (Br): | ± 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 10 mm | ||
| C: | 8 mm | ||
| D: | 6 mm | ||
| E: | 0 mm | ||
| F: | 16 mm | ||
| G: | 0 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | NPN | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NC | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Operating distance 2 mm flush/4 mm non-flush |
| High switching frequency |
| Short-circuit protection (pulsed) |
| Compact design |
| IP 67 enclosure rating |
Your benefits
| Time- saving, easy installation in space-critical applications |
| Reliable detection of fast handling and assembly processes |
| Quick and easy installation saves time |
| Compact housing provides a high degree of design freedom |
Note: This part is discontinued. Please see the replacement product under "Replacement Products" link. "
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 5,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 1.5 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 2 ms | ||
| Hysteresis: | 1 % ... 10 % | ||
| Повторяемость: | ≤ 1 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 300 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | 3.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, PA12 | ||
| Материал корпуса: | Plastic | ||
| UL File No.: | NRKH.E348498 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 16 mm | ||
| C: | 8 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Connector M8, 3-pin | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Tough VISTALTM housing |
| SICK-ASIC technology |
| 270° status display with extra-bright LED |
| Extended sensing range of up to 4 mm |
| Hotmelt molding |
| Threaded metal inserts |
| IP 68 enclosure rating |
Your benefits
| Best mechanical and electronic stability for extra-long service life |
| Highest levels of process reliability for your application |
| Long service life that reduce maintenance costs thanks to SICK's ASIC technology and rugged VISTALTM housing |
| Precise detection and high sensor accuracy enable fast handling and assembly processes |
| Space-saving integration in every application |
| Increased levels of protection against shock and vibration reduce maintenance costs |
| Quick viewing of sensor status from any position in the room reduces mounting time and commissioning |
| Safe, fast mounting without any need for readjustment saves installation time and maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 8 mm x 8 mm x 40 mm | ||
| Sensing range Sn: | 4 mm | ||
| Assured sensing range Sa: | 3.24 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 2,000 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 IP 68 1) |
||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 10 % 1) | ||
| Падение напряжения: | ≤ 2 V 2) | ||
| Потребляемая мощность: | ≤ 10 mA 3) | ||
| Time delay before availability: | ≤ 100 ms | ||
| Hysteresis: | 5 % ... 15 % | ||
| Повторяемость: | ≤ 2 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Материал кабеля: | PVC | ||
| Сечение провода: | 0.14 mm² | ||
| Cable diameter: | Ø 2.9 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +75 °C | ||
| Sensing face material: | Plastic, VISTAL | ||
| Момент затяжки, Макс.: | ≤ 1.5 Nm | ||
| Материал корпуса: | Plastic, VISTAL | ||
| UL File No.: | NRKH.E348498 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | 0.7 | ||
| Copper (Cu): | 0.4 | ||
| Aluminum (Al): | 0.5 | ||
| Brass (Br): | 0.5 | ||
| Installation note | |||
| A: | 4 mm | ||
| B: | 24 mm | ||
| C: | 8 mm | ||
| D: | 12 mm | ||
| E: | 20 mm | ||
| F: | 32 mm | ||
| G: | 8 mm | ||
| Remark: | Associated graphic see "Installation" | ||