At a glance
| Flat, compact design |
| Long sensing distance up to 5 mm |
| Easily visible indication LEDs |
| Available in a metal housing |
| Dimensions: 25 mm x 50 mm x 10 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 25 mm x 50 mm x 10 mm | ||
| Sensing range Sn: | 5 mm | ||
| Assured sensing range Sa: | 4.05 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 500 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 4-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 15 % 1) | ||
| Падение напряжения: | ≤ 2.5 V 2) | ||
| Потребляемая мощность: | 32 mA 3) | ||
| Time delay before availability: | ≤ 50 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 200 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.25 mm² | ||
| Cable diameter: | Ø 4.6 mm | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Metal, GD Al Si 12 | ||
| Sensing face material: | Plastic, PBT | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 25 mm | ||
| C: | 25 mm | ||
| D: | 15 mm | ||
| E: | 0 mm | ||
| F: | 75 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Flat, compact design |
| Long sensing distance up to 5 mm |
| Easily visible indication LEDs |
| Available in a metal housing |
| Dimensions: 25 mm x 50 mm x 10 mm |
Your benefits
| Reduced mechanical damage due to space-saving flat housing, which does not protrude from sensor |
| Time-saving simple installation with one or two screws |
| No restrictions on machine design |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 25 mm x 50 mm x 10 mm | ||
| Sensing range Sn: | 5 mm | ||
| Assured sensing range Sa: | 4.05 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 500 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Cable, 3-wire, 2 m | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 15 % 1) | ||
| Падение напряжения: | ≤ 2.5 V 2) | ||
| Потребляемая мощность: | 25 mA 3) | ||
| Time delay before availability: | ≤ 50 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ± 5 % 4)5) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | 200 mA | ||
| Материал кабеля: | PUR | ||
| Сечение провода: | 0.34 mm² | ||
| Cable diameter: | 4.6 mm | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Metal, GD Al Si 12 | ||
| Sensing face material: | Plastic, PBT | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 25 mm | ||
| C: | 25 mm | ||
| D: | 15 mm | ||
| E: | 0 mm | ||
| F: | 75 mm | ||
| Remark: | Associated graphic see "Installation" | ||