At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 118 mm | ||
| Sensing range Sn: | 15 mm | ||
| Assured sensing range Sa: | 12.15 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 20 Hz | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | AC 2-wire | ||
| Enclosure rating: | IP 68 1) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 20 V AC ... 253 V AC 1) | ||
| Падение напряжения: | ≤ 12 V | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 500 mA | ||
| Off-state current: | ≤ 1.95 mA | ||
| Short-time withstand current: | 3 A 2) | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: |  |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBT | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.75 | ||
| Copper (Cu): | Ca. 0.25 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 60 mm | ||
| C: | 40 mm | ||
| D: | 45 mm | ||
| E: | 0 mm | ||
| F: | 80 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 118 mm | ||
| Sensing range Sn: | 15 mm | ||
| Assured sensing range Sa: | 12.15 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 400 Hz | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | DC 2-wire | ||
| Enclosure rating: | IP 68 1) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 5 V DC ... 60 V DC | ||
| Падение напряжения: | ≤ 5 V 1) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA (2 mA) | ||
| Off-state current: | ≤ 1 mA | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBT | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.75 | ||
| Copper (Cu): | Ca. 0.25 | ||
| Aluminum (Al): | Ca. 0.28 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 60 mm | ||
| C: | 40 mm | ||
| D: | 45 mm | ||
| E: | 0 mm | ||
| F: | 80 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 121 mm | ||
| Sensing range Sn: | 15 mm | ||
| Assured sensing range Sa: | 12.15 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 300 Hz | ||
| Output type: | PNP | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 65 1) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 15 mA 2) | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 250 mA | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 80 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PPE | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 40 mm | ||
| C: | 40 mm | ||
| D: | 45 mm | ||
| E: | 0 mm | ||
| F: | 120 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 118 mm | ||
| Sensing range Sn: | 15 mm | ||
| Assured sensing range Sa: | 12.15 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 150 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 68 1) | ||
| Тип подключения: | Cable gland | ||
| Housing: | Standard | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 60 V DC | ||
| Падение напряжения: | ≤ 2.8 V 1) | ||
| Потребляемая мощность: | ≤ 10 mA 2) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBT | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.75 | ||
| Copper (Cu): | Ca. 0.25 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 60 mm | ||
| C: | 40 mm | ||
| D: | 45 mm | ||
| E: | 0 mm | ||
| F: | 80 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 121 mm | ||
| Sensing range Sn: | 15 mm | ||
| Assured sensing range Sa: | 12.15 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 20 Hz, 55 Hz 1)2) | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | AC/DC 2-wire | ||
| Enclosure rating: | IP 65 3) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 20 V AC/DC ... 250 V AC/DC | ||
| Падение напряжения: | ≤ 6 V (DC), ≤ 6.5 V (AC) | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 As per EN 55011, class B |
||
| Непрерывный ток Ia: | ≤ 100 mA (DC), ≤ 250 mA (AC (+80 °C)), ≤ 350 mA (AC (+50 °C)) | ||
| Off-state current: | ≤ 0.8 mA (DC 24 V), ≤ 1.3 mA (AC 110 V), ≤ 2.5 mA (AC 250 V) | ||
| Load resistance, min.: | > 5 mA | ||
| Short-time withstand current: | 2.2 A 1) | ||
| Wire size: | ≤ 2.5 mm² | ||
| Short-circuit protection 2): | - | ||
| Защита от обратной полярности: | - | ||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PPE | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 40 mm | ||
| C: | 40 mm | ||
| D: | 45 mm | ||
| E: | 0 mm | ||
| F: | 120 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 62 mm | ||
| Sensing range Sn: | 20 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Пульсации: | ≤ 15 % | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 20 mA | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ≤ 5 % 2) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | - | ||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBTP | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 66 mm | ||
| Sensing range Sn: | 20 mm | ||
| Assured sensing range Sa: | 16.2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin 2) | ||
| Special features: | Class 2 power source, as per cULus | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 25 mA 2) | ||
| Hysteresis: | 1 % ... 20 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA6 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 40 mm | ||
| C: | 40 mm | ||
| D: | 60 mm | ||
| E: | 0 mm | ||
| F: | 160 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 66 mm | ||
| Sensing range Sn: | 20 mm | ||
| Assured sensing range Sa: | 16.2 mm | ||
| Installation type: | Flush | ||
| Частота переключений: | 100 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin 2) | ||
| Special features: | Class 2 power source, as per cULus | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 20 mA 2) | ||
| Hysteresis: | 1 % ... 20 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA6 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 40 mm | ||
| C: | 40 mm | ||
| D: | 60 mm | ||
| E: | 0 mm | ||
| F: | 160 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 121 mm | ||
| Sensing range Sn: | 20 mm | ||
| Assured sensing range Sa: | 16.2 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 300 Hz | ||
| Output type: | PNP | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 65 1) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 15 mA 2) | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 250 mA | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PPE | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 80 mm | ||
| B: | 80 mm | ||
| C: | 40 mm | ||
| D: | 60 mm | ||
| F: | 120 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 118 mm | ||
| Sensing range Sn: | 20 mm | ||
| Assured sensing range Sa: | 16.2 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 150 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 68 1) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 60 V DC | ||
| Падение напряжения: | ≤ 2.8 V 1) | ||
| Потребляемая мощность: | ≤ 10 mA 2) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| Wire size: | ≤ 2.5 mm² | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBT | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.8 | ||
| Copper (Cu): | Ca. 0.35 | ||
| Aluminum (Al): | Ca. 0.35 | ||
| Installation note | |||
| A: | 0 mm | ||
| B: | 120 mm | ||
| C: | 40 mm | ||
| D: | 60 mm | ||
| E: | 25 mm | ||
| F: | 120 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 121 mm | ||
| Sensing range Sn: | 20 mm | ||
| Assured sensing range Sa: | 16.2 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 20 Hz, 55 Hz 1)2) | ||
| Output function: | NCÂ or NO | ||
| Electrical wiring: | AC/DC 2-wire | ||
| Enclosure rating: | IP 65 3) | ||
| Тип подключения: | Terminal connection with M20 gland | ||
| Housing: | Standard | ||
| Output characteristic: | Wire configurable | ||
| Механика/электроника | |||
| Supply voltage: | 20 V AC/DC ... 250 V AC/DC | ||
| Падение напряжения: | ≤ 6 V (DC), ≤ 6.5 V (AC) | ||
| Hysteresis: | 1 % ... 15 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 As per EN 55011, class B |
||
| Непрерывный ток Ia: | ≤ 100 mA (DC), ≤ 250 mA (AC (+80 °C)), ≤ 350 mA (AC (+50 °C)) | ||
| Off-state current: | ≤ 0.8 mA (DC 24 V), ≤ 1.3 mA (AC 110 V), ≤ 2.5 mA (AC 250 V) | ||
| Load resistance, min.: | > 5 mA | ||
| Short-time withstand current: | 2.2 A 1) | ||
| Wire size: | ≤ 2.5 mm² | ||
| Short-circuit protection 2): | - | ||
| Защита от обратной полярности: | - | ||
| Импульсная защита: | - | ||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... +80 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PPE | ||
| Terminal thread size: | M20 x 1.5 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.2 | ||
| Aluminum (Al): | Ca. 0.3 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 80 mm | ||
| B: | 80 mm | ||
| C: | 40 mm | ||
| D: | 60 mm | ||
| F: | 160 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 62 mm | ||
| Sensing range Sn: | 30 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 50 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 20 mA 2) | ||
| Time delay before availability: | ≤ 30 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ≤ 5 % 3)4) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBTP | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
| Magnetic field resistant |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 62 mm | ||
| Sensing range Sn: | 35 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 250 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin | ||
| Special features: | Factor 1 for all metals | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 30 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 15 mA 2) | ||
| Time delay before availability: | ≤ 30 ms | ||
| Hysteresis: | 1 % ... 15 % | ||
| Повторяемость: | ≤ 5 % 3)4) | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -10 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PBTP | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 66 mm | ||
| Sensing range Sn: | 35 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 80 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin 2) | ||
| Special features: | Class 2 power source, as per cULus | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 25 mA 2) | ||
| Hysteresis: | 1 % ... 20 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA6 | ||
| Installation note | |||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 66 mm | ||
| Sensing range Sn: | 40 mm | ||
| Assured sensing range Sa: | 32.4 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 60 Hz | ||
| Output type: | PNP | ||
| Output function: | Complementary | ||
| Electrical wiring: | DC 4-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin 2) | ||
| Special features: | Class 2 power source, as per cULus | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 25 mA 2) | ||
| Hysteresis: | 1 % ... 20 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA6 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 80 mm | ||
| B: | 100 mm | ||
| C: | 40 mm | ||
| D: | 120 mm | ||
| E: | 40 mm | ||
| F: | 320 mm | ||
| Remark: | Associated graphic see "Installation" | ||
At a glance
| Increased operating distance up to 40 mm |
| Corner LEDs |
| Sensing face rotatable in five directions |
| Sturdy and compact design |
| Integrated mounting clamp |
| DC and AC/DC versions available |
Your benefits
| Flexible mounting options due to rotatable sensor head |
| Time-saving monitoring with highly visible power and output LEDs. |
| Cost reduction due to reduced mechanical damage with increased sensing distance |
| Shorter installation times due to integrated mounting fixture |
| Reduced maintenance costs |
| Features | |||
| Housing: | Rectangular | ||
| Dimensions (W x H x D): | 40 mm x 40 mm x 66 mm | ||
| Sensing range Sn: | 40 mm | ||
| Assured sensing range Sa: | 32.4 mm | ||
| Installation type: | Non-flush | ||
| Частота переключений: | 60 Hz | ||
| Output type: | PNP | ||
| Output function: | NO | ||
| Electrical wiring: | DC 3-wire | ||
| Enclosure rating: | IP 67 1) | ||
| Тип подключения: | Connector M12, 4-pin 2) | ||
| Special features: | Class 2 power source, as per cULus | ||
| Housing: | Short-body | ||
| Механика/электроника | |||
| Supply voltage: | 10 V DC ... 36 V DC | ||
| Падение напряжения: | ≤ 2.5 V 1) | ||
| Потребляемая мощность: | ≤ 20 mA 2) | ||
| Hysteresis: | 1 % ... 20 % | ||
| Температурный дрейфт: | ± 10 % | ||
| EMC: | According to EN 60947-5-2 | ||
| Непрерывный ток Ia: | ≤ 200 mA | ||
| защита от короткого замыкания: | |
||
| Защита от обратной полярности: | |
||
| Импульсная защита: | |
||
| Ударная и вибрационная устойчивость: | 30 g, 11 ms / 10 ... 55 Hz, 1 mm | ||
| Ambient operating temperature: | -25 °C ... 70 °C | ||
| Материал корпуса: | Plastic | ||
| Sensing face material: | Plastic, PA6 | ||
| Понижающие коэффициенты | |||
| Примечание: | The values are reference values which may vary | ||
| Stainless steel (V2A, 304): | Ca. 0.7 | ||
| Copper (Cu): | Ca. 0.3 | ||
| Aluminum (Al): | Ca. 0.4 | ||
| Brass (Br): | Ca. 0.4 | ||
| Installation note | |||
| A: | 80 mm | ||
| B: | 100 mm | ||
| C: | 40 mm | ||
| D: | 120 mm | ||
| E: | 40 mm | ||
| F: | 320 mm | ||
| Remark: | Associated graphic see "Installation" | ||