At a glance
| Object detection and differentiation on the basis of surface gloss level |
| Configurable in many different operating modes to meet the requirements of any application |
| Integrated alignment aid |
| Integrated automation functions |
| Two digital push-pull outputs and one configurable input |
| Sensitivity adjusts to object properties |
| IO-Link provides easy data access from the PLC |
| Quick and easy configuration |
Your benefits
| Quick installation via alignment mode |
| Integrated key lock reduces the risk of operating errors and tampering |
| Sensitivity adjustments increase the system's operational safety |
| Teach-in via the single teach-in button or SOPAS operating software facilitates quick and easy operation |
| Reliable gloss identification regardless of color, labeling or structure increases operational safety |
| State-of-the-art detection method makes it possible to conduct inspections at lower costs than with camera solutions |
| Sensor's resistance to object fluctuations increases operational safety |
| Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link |
| Features | |||
| Dimensions (W x H x D): | 42.5 mm x 44 mm x 43.4 mm | ||
| Принцип действия датчика: | Delta-S-Technology® | ||
| Sensing distance: | 50 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing distance tolerance: | ± 5 mm | ||
| Alignment tolerance 1): | ± 1 ° | ||
| Minimum detectable object (MDO) 2): | 12 x 14 mm: | ||
| Light source 3): | LED | ||
| Type of light: | Visible red light | ||
| Длина волны: | 640 nm | ||
| Object speed max. 4): | 2 m/s | ||
| Sensitivity: | Fine, Coarse, Middle | ||
| Режим обучения: | Static 1-point teach-in 2-point teach-in dynamic Static 2-point teach-in Static 3-point teach-in |
||
| Регулировки: | Single teach-in button Teach-in Cable Teach-in Potentiometer Sensitivity (Q, Q/, teach-in) |
||
| IO-Link: | - | ||
| IO-Link functions: | - | ||
| IO-Link advanced functions: | - | ||
| Механика/электроника | |||
| Supply voltage 1): | 10 V DC ... 30 V DC | ||
| Ripple 2): | ≤ 5 Vpp | ||
| Power consumption 3): | |||
| Switching frequency 4): | 500 Hz | ||
| Response time 5): | 1 ms | ||
| Дрожание: | 500 µs | ||
| Input: | HIGH = > VS - 2 V / LOW = open or | ||
| Output type: | Push/Pull (High: VS - 3 V, Low: | ||
| Number of switching outputs: | 2 (Q1, Q2) | ||
| Output current Imax. 6): | |||
| Initialization time: | |||
| Тип подключения: | Connector M12, 5-pin | ||
| Устойчивость к освещенности окружающей среды: | > 50 klx | ||
| Circuit protection 7)8)9): | A, C, D | ||
| Класс защиты: | III | ||
| Fieldbus interface: | - | ||
| Enclosure rating: | IP 67, IP 67 |
||
| Вес: | 130 g | ||
| Материал корпуса: | ABS, Plastic | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -10 °C ... +55 °C | ||
| Температура хранения: | -25 °C ... +75 °C | ||
| Shock load: | Continuous shock (25 g/11 MS) Single shock (30 g/11 MS) According to EN 60068-2-27 |
||
| UL File No.: | NRKH.E181493 | ||
At a glance
| Object detection and differentiation on the basis of surface gloss level |
| Configurable in many different operating modes to meet the requirements of any application |
| Integrated alignment aid |
| Integrated automation functions |
| Two digital push-pull outputs and one configurable input |
| Sensitivity adjusts to object properties |
| IO-Link provides easy data access from the PLC |
| Quick and easy configuration |
Your benefits
| Quick installation via alignment mode |
| Integrated key lock reduces the risk of operating errors and tampering |
| Sensitivity adjustments increase the system's operational safety |
| Teach-in via the single teach-in button or SOPAS operating software facilitates quick and easy operation |
| Reliable gloss identification regardless of color, labeling or structure increases operational safety |
| State-of-the-art detection method makes it possible to conduct inspections at lower costs than with camera solutions |
| Sensor's resistance to object fluctuations increases operational safety |
| Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link |
| Features | |||
| Dimensions (W x H x D): | 42.5 mm x 44 mm x 43.4 mm | ||
| Принцип действия датчика: | Delta-S-Technology® | ||
| Sensing distance: | 50 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing distance tolerance: | ± 5 mm | ||
| Alignment tolerance 1): | ± 1 ° | ||
| Minimum detectable object (MDO) 2): | 12 x 14 mm: | ||
| Light source 3): | LED | ||
| Type of light: | Visible red light | ||
| Длина волны: | 640 nm | ||
| Object speed max. 4): | 2 m/s | ||
| Sensitivity: | Fine, Coarse, Middle | ||
| Режим обучения: | Static 1-point teach-in 2-point teach-in dynamic Static 2-point teach-in Static 3-point teach-in |
||
| Регулировки: | Single teach-in button Teach-in Cable, IO-Link Teach-in / Keylock Potentiometer Sensitivity (Q, Q/, teach-in) 5) |
||
| IO-Link: |  |
||
| IO-Link functions: | Standard functions | ||
| IO-Link advanced functions: | - | ||
| Механика/электроника | |||
| Supply voltage 1): | 10 V DC ... 30 V DC | ||
| Ripple 2): | ≤ 5 Vpp | ||
| Power consumption 3): | |||
| Switching frequency 4): | 500 Hz | ||
| Response time 5): | 1 ms | ||
| Дрожание: | 500 µs | ||
| Input: | HIGH = > VS - 2 V / LOW = open or | ||
| Output type: | Push/Pull (High: VS - 3 V, Low: | ||
| Number of switching outputs: | 2 (Q1, Q2) | ||
| Output current Imax. 6): | |||
| Initialization time: | |||
| Тип подключения: | Connector M12, 5-pin | ||
| Устойчивость к освещенности окружающей среды: | > 50 klx | ||
| Circuit protection 7)8)9): | A, C, D | ||
| Класс защиты: | III | ||
| Fieldbus interface: | IO-Link | ||
| Enclosure rating: | IP 67, IP 67 |
||
| Вес: | 130 g | ||
| Материал корпуса: | ABS, Plastic | ||
| On delay: | 0 s ... 30 s | ||
| Off delay: | 0 s ... 30 s | ||
| Pulse duration: | ≤ 30 s | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -10 °C ... +55 °C | ||
| Температура хранения: | -25 °C ... +75 °C | ||
| Shock load: | Continuous shock (25 g/11 MS) Single shock (30 g/11 MS) According to EN 60068-2-27 |
||
| UL File No.: | NRKH.E181493 | ||
At a glance
| Object detection and differentiation on the basis of surface gloss level |
| Configurable in many different operating modes to meet the requirements of any application |
| Integrated alignment aid |
| Integrated automation functions |
| Two digital push-pull outputs and one configurable input |
| Sensitivity adjusts to object properties |
| IO-Link provides easy data access from the PLC |
| Quick and easy configuration |
Your benefits
| Quick installation via alignment mode |
| Integrated key lock reduces the risk of operating errors and tampering |
| Sensitivity adjustments increase the system's operational safety |
| Teach-in via the single teach-in button or SOPAS operating software facilitates quick and easy operation |
| Reliable gloss identification regardless of color, labeling or structure increases operational safety |
| State-of-the-art detection method makes it possible to conduct inspections at lower costs than with camera solutions |
| Sensor's resistance to object fluctuations increases operational safety |
| Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link |
| Features | |||
| Dimensions (W x H x D): | 42.5 mm x 44 mm x 43.4 mm | ||
| Принцип действия датчика: | Delta-S-Technology® | ||
| Sensing distance: | 50 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing distance tolerance: | ± 5 mm | ||
| Alignment tolerance 1): | ± 1 ° | ||
| Minimum detectable object (MDO) 2): | 12 x 14 mm: | ||
| Light source 3): | LED | ||
| Type of light: | Visible red light | ||
| Длина волны: | 640 nm | ||
| Object speed max. 4): | 2 m/s | ||
| Sensitivity: | Fine, Coarse, Middle | ||
| Режим обучения: | Static 1-point teach-in 2-point teach-in dynamic Static 2-point teach-in Static 3-point teach-in |
||
| Регулировки: | Single teach-in button Teach-in Cable, IO-Link Teach-in / Keylock Potentiometer Sensitivity (Q, Q/, teach-in) 5) |
||
| IO-Link: | |
||
| IO-Link functions: | Standard functions | ||
| IO-Link advanced functions: | - | ||
| Механика/электроника | |||
| Supply voltage 1): | 10 V DC ... 30 V DC | ||
| Ripple 2): | ≤ 5 Vpp | ||
| Power consumption 3): | |||
| Switching frequency 4): | 500 Hz | ||
| Response time 5): | 1 ms | ||
| Дрожание: | 500 µs | ||
| Input: | HIGH = > VS - 2 V / LOW = open or | ||
| Output type: | Push/Pull (High: VS - 3 V, Low: | ||
| Number of switching outputs: | 2 (Q1, Q2) | ||
| Output current Imax. 6): | |||
| Initialization time: | |||
| Тип подключения: | Connector M12, 5-pin | ||
| Устойчивость к освещенности окружающей среды: | > 50 klx | ||
| Circuit protection 7)8)9): | A, C, D | ||
| Класс защиты: | III | ||
| Fieldbus interface: | IO-Link | ||
| Enclosure rating: | IP 67, IP 67 |
||
| Вес: | 130 g | ||
| Материал корпуса: | ABS, Plastic | ||
| On delay: | 0 s ... 30 s | ||
| Off delay: | 0 s ... 30 s | ||
| Pulse duration: | ≤ 30 s | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -10 °C ... +55 °C | ||
| Температура хранения: | -25 °C ... +75 °C | ||
| Shock load: | Continuous shock (25 g/11 MS) Single shock (30 g/11 MS) According to EN 60068-2-27 |
||
| UL File No.: | NRKH.E181493 | ||
At a glance
| Object detection and differentiation on the basis of surface gloss level |
| Configurable in many different operating modes to meet the requirements of any application |
| Integrated alignment aid |
| Integrated automation functions |
| Two digital push-pull outputs and one configurable input |
| Sensitivity adjusts to object properties |
| IO-Link provides easy data access from the PLC |
| Quick and easy configuration |
Your benefits
| Quick installation via alignment mode |
| Integrated key lock reduces the risk of operating errors and tampering |
| Sensitivity adjustments increase the system's operational safety |
| Teach-in via the single teach-in button or SOPAS operating software facilitates quick and easy operation |
| Reliable gloss identification regardless of color, labeling or structure increases operational safety |
| State-of-the-art detection method makes it possible to conduct inspections at lower costs than with camera solutions |
| Sensor's resistance to object fluctuations increases operational safety |
| Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link |
| Features | |||
| Dimensions (W x H x D): | 42.5 mm x 44 mm x 43.4 mm | ||
| Принцип действия датчика: | Delta-S-Technology® | ||
| Sensing distance: | 50 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing distance tolerance: | ± 5 mm | ||
| Alignment tolerance 1): | ± 1 ° | ||
| Minimum detectable object (MDO) 2): | 12 x 14 mm: | ||
| Light source 3): | LED | ||
| Type of light: | Visible red light | ||
| Длина волны: | 640 nm | ||
| Object speed max. 4): | 2 m/s | ||
| Sensitivity: | Fine, Coarse, Middle | ||
| Режим обучения: | Static 1-point teach-in 2-point teach-in dynamic Static 2-point teach-in Static 3-point teach-in |
||
| Регулировки: | Single teach-in button Teach-in Cable, IO-Link Counter reset Potentiometer Sensitivity (Q, Q/, teach-in) |
||
| IO-Link: | |
||
| IO-Link functions: | Advanced functions, Standard functions | ||
| IO-Link advanced functions: | High speed counter | ||
| Механика/электроника | |||
| Supply voltage 1): | 10 V DC ... 30 V DC | ||
| Ripple 2): | ≤ 5 Vpp | ||
| Power consumption 3): | |||
| Switching frequency 4): | 500 Hz | ||
| Response time 5): | 1 ms | ||
| Дрожание: | 500 µs | ||
| Input: | HIGH = > VS - 2 V / LOW = open or | ||
| Output type: | Push/Pull (High: VS - 3 V, Low: | ||
| Number of switching outputs: | 2 (Q1, Q2) | ||
| Output current Imax. 6): | |||
| Initialization time: | |||
| Тип подключения: | Connector M12, 5-pin | ||
| Устойчивость к освещенности окружающей среды: | > 50 klx | ||
| Circuit protection 7)8)9): | A, C, D | ||
| Класс защиты: | III | ||
| Fieldbus interface: | IO-Link | ||
| Enclosure rating: | IP 67, IP 67 |
||
| Вес: | 130 g | ||
| Материал корпуса: | ABS, Plastic | ||
| On delay: | 0 s ... 30 s | ||
| Off delay: | 0 s ... 30 s | ||
| Pulse duration: | ≤ 30 s | ||
| Данные окуражающей среды | |||
| Ambient operating temperature: | -10 °C ... +55 °C | ||
| Температура хранения: | -25 °C ... +75 °C | ||
| Shock load: | Continuous shock (25 g/11 MS) Single shock (30 g/11 MS) According to EN 60068-2-27 |
||
| UL File No.: | NRKH.E181493 | ||