Facebook Mail.ru ok.ru ВКонтакте
 
+7 (812) 432-38-38
+7 (812) 432-36-36
Пн-Пт 9:00 — 18:00
 
Заказать оборудование
 
 
 
 
 
ARS60 SSI/Parallel
Главная» Продукция» SICK» Энкодеры» Абсолютные энкодеры» ARS60 SSI/Parallel
 
 
Rotary
 


Страницы:
12345678910111213141516
 



ARS60-A1A00360
Арт. 1034383

At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 360
    Макс. число оборотов: 1
    Разрешающая способность: 360 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A00720
    Арт. 1034466

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 720
    Макс. число оборотов: 1
    Разрешающая способность: 720 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A01024
    Арт. 1031399

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A01892
    Арт. 1036126

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,892
    Макс. число оборотов: 1
    Разрешающая способность: 1,892 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A02048
    Арт. 1034242

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 1
    Разрешающая способность: 2,048 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A03600
    Арт. 1035830

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 3,600
    Макс. число оборотов: 1
    Разрешающая способность: 3,600 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A04096
    Арт. 1031428

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A05000
    Арт. 1036538

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 5,000
    Макс. число оборотов: 1
    Разрешающая способность: 5,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A07200
    Арт. 1031444

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 7,200
    Макс. число оборотов: 1
    Разрешающая способность: 7,200 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A08129
    Арт. 1031446

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,129
    Макс. число оборотов: 1
    Разрешающая способность: 8,129 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A08192
    Арт. 1031453

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A10000
    Арт. 1036379

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 10,000
    Макс. число оборотов: 1
    Разрешающая способность: 10,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A16384
    Арт. 1031479

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 16,384
    Макс. число оборотов: 1
    Разрешающая способность: 16,384 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A18000
    Арт. 1031483

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 18,000
    Макс. число оборотов: 1
    Разрешающая способность: 18,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A21600
    Арт. 1035366

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 21,600
    Макс. число оборотов: 1
    Разрешающая способность: 21,600 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A32767
    Арт. 1031488

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1A32768
    Арт. 1031503

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, radial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B00360
    Арт. 1031390

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 360
    Макс. число оборотов: 1
    Разрешающая способность: 360 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B00512
    Арт. 1031395

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 512
    Макс. число оборотов: 1
    Разрешающая способность: 512 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B01024
    Арт. 1031400

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B02048
    Арт. 1031417

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 1
    Разрешающая способность: 2,048 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B04096
    Арт. 1031429

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B08192
    Арт. 1031455

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B32767
    Арт. 1031813

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1B32768
    Арт. 1031505

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Масса: 0.3 kg
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Connector M23, 12-pin, axial
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 65 (according to IEC 60529), with mating connector fitted
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K00720
    Арт. 1034400

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 720
    Макс. число оборотов: 1
    Разрешающая способность: 720 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K04096
    Арт. 1036176

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K08192
    Арт. 1031454

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K18000
    Арт. 1035199

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 18,000
    Макс. число оборотов: 1
    Разрешающая способность: 18,000 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K32767
    Арт. 1031806

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1K32768
    Арт. 1031504

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L00256
    Арт. 1036566

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 256
    Макс. число оборотов: 1
    Разрешающая способность: 256 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L00720
    Арт. 1030157

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 720
    Макс. число оборотов: 1
    Разрешающая способность: 720 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L01024
    Арт. 1031401

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L02048
    Арт. 1035154

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 2,048
    Макс. число оборотов: 1
    Разрешающая способность: 2,048 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L04096
    Арт. 1035273

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L08192
    Арт. 1031745

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L32767
    Арт. 1032591

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1L32768
    Арт. 1031507

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 3 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1M04096
    Арт. 1031430

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1M08192
    Арт. 1031456

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1M16384
    Арт. 1031480

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 16,384
    Макс. число оборотов: 1
    Разрешающая способность: 16,384 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1M32767
    Арт. 1031804

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1M32768
    Арт. 1031509

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,768
    Макс. число оборотов: 1
    Разрешающая способность: 32,768 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1N08192
    Арт. 1034594

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 10 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1N32767
    Арт. 1034593

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, radial, 10 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1R01024
    Арт. 1032902

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 1,024
    Макс. число оборотов: 1
    Разрешающая способность: 1,024 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1R04096
    Арт. 1032903

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 4,096
    Макс. число оборотов: 1
    Разрешающая способность: 4,096 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1R08192
    Арт. 1031746

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 8,192
    Макс. число оборотов: 1
    Разрешающая способность: 8,192 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
    ARS60-A1R32767
    Арт. 1031489

    At a glance

  		•  Absolute singleturn encoder
  		• Resolution: up to 15 bits (32,768 increments)
  		• Electrical interface: SSI with gray code type or gray capped
  		• Electrical interface: Parallel with gray, gray capped, binary, BCD code type
  		• Zero-set function
  		• Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
  		• Enclosure rating: Up to IP66

    Your benefits

  		•  Optical and magnetic variants for the widest range of requirements
  		• Reduced maintenance costs thanks to magnetic, wearless scanning in single and multiturn design
  		• High level of productivity due to optical encoders with a high level of precision and fast calculation of positions
  		• Robust design for maximum system availability, even in extreme environmental conditions
  		• Absolutely compact - specially suited in cases where installation space is tight
  		• Flexible integration in all common networks
    Performance
    Max. number of steps per revolution: 32,767
    Макс. число оборотов: 1
    Разрешающая способность: 32,767 x 1
    Пределы погрешности: 0.035 ° (binary number of steps)
    0.046 ° (non-binary number of steps)
    Repeatability (Ta not constant): 0.005 °
    Measuring step deviation: 0.005 °, 0.016 °
    Шаг измерения: 360 ° /number of lines
    Время инициализации: 80 ms 1)
    Mechanical data
    Механический интерфейс: Solid shaft, Servo flange
    Диаметр вала: 6 mm
    Крутящий момент на старте: 0.25 Ncm
    Момент вращения: 0.2 Ncm
    Permissible Load capacity of shaft: 10 N (axial), 20 N (radial)
    Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal) 1)
    Moment of inertia of the rotor: 48 gcm²
    Bearing lifetime: 3.6 x 10^9 revolutions
    Макс. угловое ускорение: 500,000 rad/s²
    Установка нуля: ≥ 100 ms 2)
    Electrical data
    Диапазон рабочего напряжения: 10 V DC ... 32 V DC
    Номинальная потребляемая мощность (без нагрузки): 60 mA
    MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) 1)
    Interfaces
    Electrical interface: Cable, 11-pin, axial, 1.5 m
    Данные окуражающей среды
    EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
    Enclosure rating: IP 66 (according to IEC 60529)
    Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
    Working temperature range: -20 °C ... 85 °C
    Storage temperature range: -40 °C ... 100 °C
    Устойчивость к ударам: 50 g (according to EN 60068-2-27)
    Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
     
     


    Страницы:
    12345678910111213141516
     

     
     
    ⋆
     
     
    Имя Отчество:
     
    Адрес электронной почты:
     
    Контактный телефон:
     
    Наименование компании:
     
    Содержание заказа: