Страницы:
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 5/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 5/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Plastic | ||
| Shaft plug-in length: | ≥ 48 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 12,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 3/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 10 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 12 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 1/2 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 14 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 15 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 5/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 1) | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.03 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 30 ms | ||
| Mechanical data | |||
| Shaft version: | Through hollow shaft | ||
| Диаметр вала: | 5/8 " | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | ≥ 15 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 9,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.05 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.01 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/HTL programmable | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 32 V | ||
| Maximum output frequency: | 820 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 60 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), housing side cable outlet, IP 65 (according to IEC 60529), shaft side | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 1,024 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 5.5 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 8,192 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 5.5 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 65,536 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 5.5 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 65,536 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 4.5 V ... 5.5 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 65,536 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 0.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 10 V ... 32 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
* When ordering for the first time, please use the information in "Model Name" instead of "Part No."
At a glance
| TTL, HTL or sine 0.5 VSS interfaces |
| Resolution of up to 65,536 lines per revolution |
| Individual programming of the interface, line count and of the zero pulse |
| Direct programming via RS485 |
| Excellent concentricity through large distance between the ball bearings |
| Exceptional robustness an protection class IP 65 |
| Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports |
| Temperature range from -30 °C to +100 °C |
Your benefits
| Programmable version for a reduced product variety |
| Various programming tools designed to take into account your own programming requirements |
| High performance and reliability even in rough ambient conditions |
| Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system's service life |
| High vibration resistance and extended temperature range through nickel code disk |
| Performance | |||
| Number of lines per revolution: | 65,536 | ||
| Reference signal, number: | 1 | ||
| Reference signal, position: | 90 ° electronically, gated with A and B | ||
| Пределы погрешности: | ± 0.05 ° | ||
| Measuring step deviation: | ± 0.01 ° | ||
| Maximum initialisation time: | 40 ms | ||
| Mechanical data | |||
| Shaft version: | Blind hollow shaft | ||
| Диаметр вала: | 8 mm | ||
| Shaft material: | Metal | ||
| Shaft plug-in length: | 15 mm ... 42 mm | ||
| Тип фланца/муфты статора: | Standard | ||
| Dimensions: | See dimensional drawing | ||
| Масса: | 0.2 kg | ||
| Moment of inertia of the rotor: | 40 gcm² | ||
| Maximum operating speed: | 6,000 /min 1) | ||
| Maximum angular acceleration: | 500,000 rad/s² | ||
| Момент вращения: | 0.6 Ncm (20 °C) | ||
| Крутящий момент на старте: | 0.8 Ncm (20 °C) | ||
| Допустимое перемещение вала, радиальное, динамическое: | ± 0.1 mm | ||
| Permissible shaft movement, axial, dynamic: | ± 0.2 mm | ||
| Life of ball bearings: | 3.0 x 10^9 revolutions | ||
| Тип подключения: | Cable, 8-pin, radial, 1.5 m 2) | ||
| Electrical data | |||
| Electrical interface: | TTL/RS422 | ||
| Operating voltage range/supply Voltage: | 10 V ... 32 V | ||
| Maximum output frequency: | 600 kHz | ||
| Maximum load current: | 30 mA | ||
| Номинальная потребляемая мощность (без нагрузки): | 40 mA 1) | ||
| Данные окуражающей среды | |||
| Working temperature range: | -30 °C ... 100 °C | ||
| Storage temperature range: | -40 °C ... 100 °C, without package | ||
| Относительная влажность / конденсат: | 90 %, condensation of the optical scanning not permitted | ||
| Устойчивость к ударам: | 70 g, 6 ms (according to EN 60068-2-27) | ||
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) | ||
| EMC: | (according to EN 61000-6-2 and EN 61000-6-4) | ||
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side cable outlet | ||
Страницы: